Blogs - Skills Academy

Samuel White Samuel White

0 Course Enrolled • 0 Course Completed

Biography

Try Free NABCEP PVIP Questions Demo Before Buy

With the rapid development of computer, network, and semiconductor techniques, the market for people is becoming more and more hotly contested. Passing a PVIP exam to get a certificate will help you to look for a better job and get a higher salary. If you are tired of finding a high quality study material, we suggest that you should try our PVIP Exam Prep. Because our PVIP exam materials not only has better quality than any other same learn products, but also can guarantee that you can pass the PVIP exam with ease.

The North American Board of Certified Energy Practitioners (NABCEP) PV Installation Professional (PVIP) Board Certification Exam is a highly respected credential for individuals working in the field of photovoltaic (PV) installation. PV Installation Professional (PVIP) Board Certification certification is awarded to individuals who have demonstrated comprehensive knowledge and experience in the installation and maintenance of solar energy systems. PVIP Exam is designed to assess the skills and knowledge required to design, install, and maintain solar photovoltaic systems in a safe and efficient manner.

>> Study PVIP Plan <<

Practice PVIP Online & Reliable PVIP Exam Camp

However, how can you get the PVIP certification successfully in the shortest time? We also know you can’t spend your all time on preparing for your exam, so it is very difficult for you to get the certification in a short time. Don’t worry; PVIP question torrent is willing to help you solve your problem. We have compiled such a PVIP Guide torrents that can help you pass the exam easily, it has higher pass rate and higher quality than other study materials. So, are you ready? Buy our PVIP guide questions; it will not let you down.

NABCEP PV Installation Professional (PVIP) Board Certification Sample Questions (Q29-Q34):

NEW QUESTION # 29
A PV connection is being made at the center of a 300 ft. long 200 feeder. See the attack diagram. The feeder originates in the upper third of the 800A main service panel (800A main breaker) with a 200A breaker and terminates in a 200A main-lug-only subpanel. The rated output of the PV system inverter is 100A.

Which are the NIMUMUM actions required to achieve an NEC-compliant installation?

A. Install a 325A at the PV source connection point on the portion of the feeder toward the subpanel, increase the capacity of this portion of the feeder to 325A, add a 200A main breaker to the subpanel, and move the 200A breaker to bottom of the main service panel, away from the 800A main breaker.
B. Install a 325A breaker at the PV source connection point on the portion of the feeder toward the subpanel. Increase the capacity of the feeder from the main panel board to 325A breaker to the bottom of the main service panel, away from the 800 main breaker.
C. Install a 200A breaker at the PV source connection point on the portion on the portion of the feeder toward the subpanel and move the 200A breaker to the top of the main service panel, adjust to the 800A main breaker.
D. Install a 200A breaker at the PV source connection point on the portion of the feeder toward the subpanel, maintain the capacity of the entire feeder, and move the 200A breaker to the bottom of the main service panel, away from the 800A main breaker.

Answer: B

NEW QUESTION # 30
Per NEC 690.11, what is the maximum allowable DC voltage for a PV system requiring arc-fault circuit protection?

A. 150V
B. 1000V
C. 600V
D. 80V

Answer: B

NEW QUESTION # 31
An installer was asked to provide a means to measure the voltage of each battery in a system. The bank is located 50 ft.
From the data logger. The installer will be using shielded. Twisted pairs of instrumentation wiring, all run in the bundle a conduct.
The signals are connected to isolated and ungrounded inputs at a data logger. Which safely precaution is MOST needed to protect the instrumentation wiring?

A. Individual nonfused disconnects are required for each set of wiringbecause all of the signals must be isolated from each other.
B. Each set of twisted pairs must be provided with properly rated fuses that are physically located at the battery.
C. An appropriately rated and sized of resistive elements for each twisted pair be located at, or very near to, the data logger terminals
D. The instrument wiring must be large (larger than # 18 AWG) to handle current from each battery and must be a double- insulated type.

Answer: B

NEW QUESTION # 32
According to the NEC, where on a residential PV system MUST the labeling describing the type of rapid shutdown be located?

A. At point on the residence designated by the AKJ and fire marshal
B. On or no more than 1 m (3. 3 ft) from the service disconnecting meant
C. A close as practicable to the PV array requiring rapid shutdown
D. On the rapid shutdown initiation device.

Answer: D

NEW QUESTION # 33
A PV array is installed on a sloped roof with a 6:12 pitch. What is the minimum fastener pullout strength required if the uplift force is 200 lbs per attachment point?

A. 600 lbs
B. 200 lbs
C. 300 lbs
D. 400 lbs

Answer: D

NEW QUESTION # 34
......

It is hard to scrutinize the PV Installation Professional (PVIP) Board Certification (PVIP) exam, particularly assuming you have less time and the subjects are tremendous. You essentially have a baffled perspective toward it and some even consider not giving the PV Installation Professional (PVIP) Board Certification exam since they can't concentrate exactly as expected. NABCEP PVIP Exam they need time to cover each point and this is unimaginable considering how they are left with only a piece of a month to give the NABCEP PVIP exam.

Practice PVIP Online: https://www.pdftorrent.com/PVIP-exam-prep-dumps.html